Network Observability
Network observability for the network you run today.
Network observability rests on four signals: SNMP, flow, streaming telemetry, and synthetic tests. Parlon polls the devices, receives the flow and telemetry, and runs the tests, then puts all four in one normalized data model. Your team reads device health, traffic, and path quality in one place, and starts alongside the tools already in service.
Source: EMA, Network Management Megatrends 2026.
Why networks stay hard to see
Each signal answers part of the question. Most teams own a tool for each one.
SNMP polling reports device state. Flow records show who is talking to whom. Streaming telemetry pushes interface and state changes as they happen. Synthetic tests measure what a user or application experiences. Each signal has value. When each lives in its own tool, an incident starts with several consoles and a manual reconciliation. EMA finds that teams switch between tools three to five times during a major incident.
Four signals, four tools
Reconciled by hand during the incident.
- An SNMP poller with its own inventory and thresholds
- A flow analyzer with its own device list
- Streaming telemetry in a separate collector or pipeline
- Synthetic tests in another product, matched to devices by name
One normalized model
Mapped at ingest, evaluated together.
- Every source mapped to one schema as it arrives, with mappings for 200+ vendors
- One inventory: an asset carries its SNMP metrics, flow, and test results
- One policy engine and one alert queue
- One set of reports, with data available to BI tools and other systems
Tool-switching finding: EMA, Vendor to Watch: Parlon, October 2026.
What Parlon monitors
Network observability across the protocols your network already speaks.
Parlon meets the network where it is. Existing devices, exporters, and telemetry feeds keep their configuration. Probes collect the data and the platform normalizes it.
Device telemetry
SNMP monitoring
Parlon polls devices over SNMP v1, v2c, and v3. It identifies each device, matches it to a profile, and discovers its interfaces and resources, so setup starts with an address and credentials, not a spreadsheet.
- 01Standard and private MIBs. Interface tables, IP and routing, host resources, and vendor-specific subtrees.
- 02SNMPv3 in full. Authentication with MD5, SHA, SHA256, or SHA512. Privacy with DES, AES, or AES256.
- 03On-demand walks. Run a walk from any active probe to see what that location sees.
Traffic
Flow analysis
Probes with the flow listener enabled receive NetFlow v5 and v9, IPFIX, and sFlow from routers and switches. Parlon normalizes the records with the rest of the data and rolls them up into hourly and daily views.
- 01Exporter control. Parlon stores flows from approved exporter ranges. It lists exporters it sees that no range covers, and an administrator claims them.
- 02Traffic in context. Flow shares an inventory and an alert queue with SNMP and synthetic data.
Streaming and APIs
Streaming telemetry
Parlon collects gNMI streaming telemetry, OpenTelemetry data, and device and cloud APIs alongside SNMP. Streaming feeds land in the same model, so a pushed interface change and a polled counter describe the same asset.
Active tests
Synthetic network tests
Probes run ICMP, TCP, DNS, HTTP/S, and SSL/TLS tests from the locations where your users and devices sit. Probe-to-probe tests measure round-trip time, jitter, and packet loss between sites.
- 01Path detail. Path bandwidth discovery, per-hop capacity, and path-change detection.
- 02No inbound ports. Probes run inside your firewall on Docker or Kubernetes, or as global vantage points.
Analyst recognition
EMA named Parlon a Vendor to Watch.
In October 2026, Enterprise Management Associates named Parlon a Vendor to Watch for network and infrastructure observability. The report covers three design choices: telemetry normalization at ingestion, analytics that reduce alert noise, and deployment as SaaS, on-premises, hybrid, or air-gapped.
It also covers the entry point EMA sees for customers: start with synthetic monitoring alongside current tools, then expand.
“Parlon addresses these challenges at the data layer, normalizing device telemetry, flow records, and synthetic traffic at ingestion.”
Shamus McGillicuddy, EMA
How it works
From device to decision in one network observability platform.
Four signals enter at the edge. One model leaves it.
Collect
Probes run beside your devices, inside your firewall or at global vantage points. They poll SNMP, receive flow, and run tests.
Normalize
Each record maps to one schema at ingest, with mappings for 200+ vendors. Names, units, and meaning match across vendors.
Store
Metrics, flow, and test results share one time-series store, open to the Metrics page, dashboards, and the REST API.
Evaluate
Policies check metrics against thresholds and evaluation windows. Alert Auto-Tune™ recommends thresholds for operators to approve.
Act
Alerts reach on-call teams. Reports reach stakeholders. Data is available to BI tools and other systems.
Vantage points
Where you poll from changes what you see.
A central poller tells you whether the platform can reach a device. It cannot tell you whether a branch, a data center, or a cloud region can. Parlon runs SNMP walks and synthetic tests from the probes you choose and keeps each result separate, so you can compare them.
| What a multi-probe walk shows | What it points to |
|---|---|
| One probe reaches the device, another does not | An ACL, firewall rule, or routing problem between that site and the device |
| All probes reach it, one returns a partial result | The path from that site is lossy, or the walk needs a longer timeout there |
| An OID appears from one probe and not another | A view or context restriction scoped by source address |
| Identical structure from every probe | The device answers the same from every site; look elsewhere |
Sealed credentials
Community strings and SNMPv3 passphrases are encrypted server-side. Probes receive a single-use handle, never the secret.
Partial results count
If a device's agent stops mid-walk, Parlon keeps everything collected and reports a count. "4,100 OIDs, then it stopped" is a diagnosis.
Permissioned and logged
Walks are role-controlled, rate-limited, and recorded. Walks of devices outside your inventory are limited to administrators.
Alerts that earn attention
Fewer, more useful alerts.
A typical NetOps professional spends 29% of the day firefighting (EMA 2026). Parlon puts policy, tuning, and reporting on the same data, so thresholds reflect how the network behaves.
Policies
Set the metric, threshold, evaluation window, severity, and clear condition. Start with a global policy for broad coverage, then add specific rules for devices and paths that need them.
Alert Auto-Tune™
Machine learning learns device and path behavior, recommends thresholds, and correlates and de-duplicates related alerts. Operators approve every change. Parlon reports about 70% less alert noise.
Parlon-reported.
Reports
Package health, trends, and alert history for NOC leads and executives. Start from a template or a blank report.
No rip-and-replace
Start beside your current tools. Move when the data supports it.
Parlon runs alongside your existing monitoring. A 30- to 60-day proof of value measures it against your current stack, on your traffic. Your team sets the pace after that.
Synthetic tests go live beside your existing tools. Probes deploy inside your firewall with no inbound ports.
Tests liveBlind spots surface. Normalized telemetry flows from SNMP devices and flow exporters. Coverage gaps appear against what you run today.
Blind spots foundAlert Auto-Tune learns how your devices and paths behave and recommends thresholds for operator approval.
Alerts tunedParlon's results sit next to your current stack's, with your costs. You decide how far and how fast to go.
Your decisionEvidence
One deployment covered network monitoring and synthetic testing.
A national health system with more than 1,000 clinic locations runs one on-premises, air-gapped Parlon deployment. It covers the work of IBM SevOne and Broadcom AppNeta.
Where legacy network monitoring still leads
Two areas favor the incumbents. Here is how Parlon approaches each.
Some legacy platforms market support for more than 250 vendors, built over decades. Parlon maps 200+ vendors into its normalized model. We check device coverage account by account before promising parity.
Legacy platforms have a longer on-premises operating history. Parlon runs on-premises and air-gapped in production at the healthcare reference. We confirm feature availability by deployment mode for each account.
Deployment, your terms
Wherever your network data has to live.
The same codebase runs in every mode. Network observability runs in regulated and closed networks without a cloud dependency.
SaaS
Parlon-managed. Probes sit beside your devices and report to the platform.
On-premises
Runs on Docker or Kubernetes inside your infrastructure.
Hybrid
Mix SaaS and on-premises by environment, on one data model.
Air-gapped
Offline operation, with no external connectivity. In production at the healthcare reference.
Feature availability is confirmed by deployment mode for each account.
Same platform, wider scope
The network under your AI clusters needs the same visibility.
The collection and normalization layer that monitors your campus, WAN, and data center networks also monitors GPU fleets and rack power. GPU fleet and rack power monitoring are available. Hop-by-hop network path monitoring for AI clusters is in development.
Bring a device list, a renewal date, or a path you cannot see. A founder will review it and tell you whether a 30- to 60-day proof of value fits.